Digger Anchor is now available at http://www.ForYourShore.com
Freshwater Digger Anchor
3 different sizes
- 10 lb – for boats up to 17 ft – $60.00
- 12 lb – for boats up to 20 ft – $70.00
- 15 lb – for boats up to 40 ft & pontoons up to 30 ft – $82.50
- Powder coated castings
- Zinc plated loops and eyehooks
- Aluminum tube encases internal parts
Best Bang for The Buck? Get the 12 pound
Assumes the “dig” position when dropped in the water Patented Digger Action Durable and rust resistant Incredible holding power! Best holding anchor for boats up to 36 ft. and Pontoons. Digs its way into mud, sand, and weeds. Holds boat when anchors twice as heavy would only skid or drag. Assumes the “dig position” when you drop it in the water. A quick jerk on the rope will release the patented Digger Anchor. But wind or boat motion won’t cause it to release. Durable and rust-resistant.
Digger Anchors
Digger or grabber cleats put constant downward pressure on the flukes to set fast and keep digging in rough and windy conditions! Incredible holding power!- without a chain! With just a jerk on the line when pulling up the anchor will drop the flukes and leave the mud, sand and weeds behind! Can be released when caught on rocks or other debris! Will work with 4:1 to 5:1 slope where others require 7:1 slope or greater!
- First anchor improvement in many years
- The Digger Anchor will hold your vessels “put” in your favorite spot in a river, lake or on the ocean.
- Just a “jerk” on the rope when pulling up anchor will drop flukes. All mud, sand and weeds will stay in the water.
- Grabber cleats or “diggers” put constant downward pressure on flukes to set fast and keep digging down in rough and windy conditions! No chain needed!
- Can be released when caught on rocks or other debris!
- Will work with a 4:2 to 5:1 scope where other require 7:1 scope or greater!
Freshwater Digger Anchor
- 3 different sizes
- 10 lb – for boats up to 17 ft
- 12 lb – for boats up to 20 ft
- 15 lb – for boats up to 40 ft – for pontoons up to 30 ft
- Powder coated castings
- Zinc plated loops and eyehooks
- Aluminum tube encases internal parts
The Dimensions of these Anchors are:
- 10 lb is 5″ x 10″ x 16″
- 12 lb is 5.5″ x 10″ x 18″
- 15 lb is 6.5″ x 11.5″ x 20″